Cut Holes In The Sloped Ceiling Recessed Lighting
Sloped ceiling recessed lighting – Unlike traditional light fixtures are recessed lights flush with the ceiling or wall installed in. This is housing for recessed light is behind the roof material, making it invisible. The result is a light that is flush with the ceiling. The angle of the roof should not stop you install a recessed lighting fixture. Special angled hood ensures that your recessed lighting will lie flat no matter how steep roof slopes.
To cut holes in the sloped ceiling recessed lighting, move the stud finder across the ceiling until it Piper, noting the presence of a joist. Mark the location of the ceiling joists in the area where you plan to install the recessed fixture with masking tape. Select a location along the sloping ceiling recessed light. You can install the fittings wherever you wish, provided you do not try to install the light over an existing roof battens.
12 Photos Gallery of: Cut Holes In The Sloped Ceiling Recessed Lighting
Place the gauge housing to the ceiling. Track lighting around the template with a pencil. Rating traced the outline with a utility knife. Cut around the edges traced the outline with a drywall saw. Remove the cut-out part of the ceiling tiles or plaster. The hole left in the sloping roof will house your recessed lighting fixture. And the cut holes in the sloped ceiling recessed lighting instructions were finished.